Sterilize Ultrasound Biopsy Needle Guide Match With GE RIC5-9-D,RIC6-12-D Transducer
1.Type:Single angle, accepts 16,17,18 Gauge instruments
2.Fits:GE RIC5-9-D,RIC6-12-D,RIC5-9W-RS
3.Features:stainless steel, reusable, easy to clean and sterilize
4.Professional new one from Chinese factory, precision manufacturing
5.Qualified one in excellent working condition
6.Provide 90 days warranty
Other Ultrasound Biopsy Needle Guides related to GE that we can offer:
Brand
Model
Angle
Applicative needle
GE
11L、12L、11L-D、12L-RS
three angles
14-22G
GE
3.5C （348C）、548C、3.5CS、AC2-5
single angle
14-22G
GE
3CRF
two angles
14-22G
GE
3S、M3S、5S、M4S
three angles
14-22G
GE
4C、4C-A、4C-D、4C-RS
three angles
14-22G
GE
8L、8L-RS
three angles
14-22G
GE
9L、9L-D、9L-RS
three angles
14-22G
GE
C1-5-D、C1-5-RS
three angles
14-22G
GE
C358、3C （3Cb）、3C-RS
three angles
14-22G
GE
E8C、E8C-RS、E8CS、IC5-9-D、IC5-9H
single angle
16、17、18G
GE
M5S、M5S-D
three angles
14-22G
GE
ML6-15-D
three angles
14-22G
GE
RIC5-9-D、RIC6-12-D、RIC5-9W-RS
single angle
16、17、18G
GE
10L （739L）
three angles
14-22G
Cleaning the Needle Guide
a) Remove the needle guide from the transducer after each use. Use a small, soft brush to remove visible contaminants from the surface. Keep parts from drying out until complete cleaning can be accomplished. b) Soak the needle guide for at least five minutes in a neutral pH, low foaming enzymatic detergent. While immersed, use instrument brush to remove trapped contaminants from surfaces and features. If visible contaminants are not easy to remove, repeat the soaking procedure for another five minutes. Remove the needle guide from cleaning solution and remove any remaining residue with dry wipe. Observe cleaning solution manufacturer’s directions for use and recommendations for concentration.
Disinfecting and Sterilizing Needle Guide
a) High-level disinfect or sterilize the needle guide using 2% glutaraldehyde-based solution. b) The needle guide can be sterilized by using steam (autoclave) at 132-138°C for 15 to 30 minutes.
