This page is focused on the technical note, model context and service information rather than product photography.
Page summary
Key service context for quote intake and technical review
Published in the Rongtao Medical Blog under Repair Guide.
Relevant system context: Philips VIVID ULTRASOUND.
Technical focus: Probe / Transducer.
Part reference: CR2032.
Use this page to compare product, repair and troubleshooting context before opening a quote request.
BrandPhilips
Model / systemVIVID ULTRASOUND · VIVID PHILIPS · EPIQ
Part typeProbe / Transducer
Part numberCR2032
Content typeRepair Guide
Technical notes
Technical body content
Technical notes
Philips IE33 ultrasonic diagnostic instrument common fault troubleshooting(3)
Fault phenomenon
The device failed to start, stopped at the "initializing hardware" screen, or error 606 was reported during startup.
Troubleshooting
The motherboard battery is dead and the BIOS Settings will automatically jump to the Default Settings, which will cause an exception to the HOST or SIP boot.Mainboard battery life is about 5 years, use a multimeter to measure the battery voltage, less than +2.85Vdc, replace the mainboard battery (HOST/SIP mainboard battery model is CR2032, UMB/EMB mainboard battery model is CR2450), and change the BIOS to Philips Settings, troubleshooting.
Service context
Rongtao uses this technical record for Philips VIVID ULTRASOUND Probe / Transducer as supporting context for quote intake, photo comparison, board identification and repair-route selection. For live availability, send the machine model, board label, fault symptom and clear photos of both sides of the part.
Philips, VIVID ULTRASOUND, Probe / Transducer, PN 453561197306 repair guide with photos, part identification, model context and Rongtao quote or repair.
